1. Decantation method

The decantation method is actually a filtration method, which is one of the physical methods in the wastewater treatment methods of the food industry. The flushing water containing copper scraps discharged from the deburring machine can be filtered to remove copper scraps after being treated by a decanter. The effluent filtered by the decanter can be reused as the cleaning water of the burr machine.

2. Chemical Law

Chemical methods include oxidation-reduction methods and chemical precipitation methods. The oxidation-reduction method uses an oxidizing agent or a reducing agent to convert harmful substances into harmless substances or substances that are easy to precipitate and precipitate. The chemical precipitation method uses one or several chemical agents to convert harmful substances into easily separated sediments or precipitates. There are many kinds of chemical agents used in PCBAOEM OEM substitute circuit board wastewater treatment. The precipitant can convert heavy metal ions into precipitates, and then pass through the inclined plate sedimentation tank, sand filter, PE filter, filter press, etc. to make the solid liquid Separate.

3. Chemical precipitation-ion exchange method

Chemical precipitation treatment of high-concentration wastewater is difficult to meet the discharge standard in one step, and it is often used in combination with ion exchange. First, use chemical precipitation to treat high-concentration circuit board wastewater to reduce the content of heavy metal ions to about 5 mg/L, and then use ion exchange to reduce heavy metal ions to discharge standards.

4. Electrolysis-ion exchange method

Among the wastewater treatment methods of food processing plants, the electrolysis method to treat high-concentration circuit board wastewater can reduce the content of heavy metal ions, and its purpose is the same as the chemical precipitation method. However, the disadvantages of the electrolysis method are: only effective for the treatment of high-concentration heavy metal ions, the concentration is reduced, the current is significantly reduced, and the efficiency is significantly weakened; the power consumption is large, and it is difficult to promote; the electrolysis method can only process a single metal. Electrolysis-ion exchange method is copper plating, etching waste liquid, for other waste water, but also use other methods to deal with.

5. Chemical method-membrane filtration method

Wastewater in the food industry is chemically pretreated to precipitate filterable particles (0.1μ in diameter) from harmful substances, and then filtered through a membrane filter device to meet the emission standards.

TEL: 0571-86705853

E-MAIL: sales@azumadr.com

URL: www.azumadr.com